PENGARUH TEKANAN KEMPA DAN KONSENTRASI PEREKAT TERHADAP SIFAT BIOBRIKET DARI LIMBAH TEMPURUNG SAWIT

Djoko Purwanto, Retno Utami Purbaningtyas, Santy Diah Suryani

Abstract


Palm shell waste has not been used optimally. Utilization can be as fuel in the form of biobriquette. The purpose of this research studied the effects of pressure hydraulic and adhesive concentration on biobriquette properties. Research includes palm shell crushed, screened with fineness 7 mesh, mixed with amylum adhesive solution 2.5% and 5%. Printed in diameter of 3 cm and a height of 7 cm. The emphasis with the pressure of 3 tons, 5 tons and 7 tons. Biobriqutte dried naturally. Quality analysis with refers to the National Standardization Agency (1994). Results pressure 3 tons and adhesive concentration of 5% produces the best with sulfur levels of negative value and calorific 4442.78 cal / g and qualify for household fuels. Treatment interactions pressure and concentration of adhesive very significant effect on moisture, ash, carbon, volatile matter content, density and compressive strengtth biobriqutte.

Keywords:  palm shell,  consentration of adhesive, pressure hydraulics, biobriquette


Full Text:

PDF

References


Altun NE, C Hicyilmaz and MV Kok. (2001). Effect of Different Binders on The Combustion Properties of Lignite Part I. Effect on Thermal Properties. J. Therm. Anal. Calorim.(65) 787-95.

Alpian. Prayitno, TA., Sutapa, GJP., & Budiadi. (2011). Kualitas Arang Kayu Galam (Melaleuca cajuputi). Jurnal Ilmu dan Teknologi Kayu Tropis. 2 (1), 141 – 152.

BSN. (1994). Analisis Kadar Air Total Contoh Batubara. Standar Nasional Indonesia (SNI). 13 – 3476 - 1994. Jakarta: Badan Standarisasi Nasional.

BSN. (1994). Analisis Kadar Abu Contoh Batubara. Standar Nasional Indonesia (SNI). 13 - 3478 - 1994. Jakarta: Badan Standarisasi Nasional.

BSN. (1994). Analisis Kadar Karbon Contoh Batubara. Standar Nasional Indonesia (SNI). 13 – 3479 - 1994. Jakarta: Badan Standarisasi Nasional.

BSN. (1994). Analisis Kadar Belerang Contoh Batubara. Standar Nasional Indonesia (SNI). 13 – 3481 – 1994. Jakarta : Badan Standarsisasi Nasional.

BSN. (1994). Analisis Kalori Contoh Batubara. Standar Nasional Indonesia (SNI). 13 - 3486 - 1994. Jakarta: Badan Standarisasi Nasional.

Danang Dwi Saputro, Widi Widayat, Rusiyanto, Harwin Saptoadi, Fauzun ; (2012). Karakterisasi Briket Dari Limbah Pengolahan Kayu Sengon Dengan Metode Cetak Panas. Prosiding Seminar Nasional Aplikasi Sains & Teknologi (SNAST) Periode III. ISSN : 1979-911X. Yogyakarta.

Habib, U. Habib, M., & Khan, A.U. (2014). Factors Influencing the Performance of Coal Briquettes. Walailak. J Sci & Tech. 11(1), 1 - 5.

Hendra, D..(2011), Pemanfaatan Eceng Gondok Untuk Bahan Baku Briket Sebagai Bahan Bakar Alternatif. Jurnal Penelitian Hasil Hutan 29 (2): 189-210. Bogor.

Kementerian Energi dan Sumber Daya Mineral (KESDM). (1993). Pedoman Pembuatan dan Pemanfaatan Batu Bara dan Bahan Bakar Padat Berbasis Batu Bara. Jakarta: Direktorat Jenderal Pertambangan Umum.

Miller MR, GL Fields, RW Fisher and TD Wheelock. (1979). Coal briquetting without a binder. In: Proceedings of the 16th Biennial Conference, IBA.

Nurwati, H. (2004). Pedoman Sifat Fisik dan Mekanik Kayu. Pusat Penelitian Teknologi Hasil Hutan. Badan Penelitian dan Pengembangan Kehutanan. Departemen Kehutanan. Bogor.

Pardamean, M. (2008). Panduan Lengkap Pengelolaan Kebun dan Pabrik Kelapa Sawit. Agromedia Pustaka, Jakarta.

Purwanto, D. (2009). Laporan Penelitian Teknologi Proses Pengarangan Limbah Tempurung Kelapa Sawit Sebagai Alternatif Sumber Energi Untuk Keperluan Industri Kecil. Program Riset Insentif Diknas. Balai Riset dan Standardisasi Industri Banjarbaru. Badan Litbang Industri. Departemen Perindustrian.

Purwanto, D. (2010), Briket Bahan Bakar dari Limbah Tempurung Sawit. Jurnal Riset Industri Hasil Hutan 2 (1) : 29 – 26. Banjarbaru.

Sudjana, (2002). Desain dan Analisis Eksperimen. Penerbit PT.Tarsito. Bandung.

Sudarja, Kuncoro Diharjo, dan J. Pramana Gentur Sutapa. (2007). Pengolahan Limbah Industri Sawit Sebagai Bahan Bakar Alternatif. Jurnal Ilmiah Semesta Teknika. 10 (1) : 69 – 81. Yogyakarta.

Taulbee D, DP Patil, RQ Honaker and BK Parekh.(2009). Briquetting of Coal Fines and Sawdust Part I: Binder and Briquetting-Parameters Evaluations. Int. J. Coal Preparat. Utilizat. (29): 1-22.

Yuliza, N., Nazir, N. dan Djalal, M. (2013). Pengaruh Komposisi Arang Sekam Padi dan Arang Kulit Biji Jarak Pagar terhadap Mutu Briket Arang. Jurnal Litbang Industri 3 (1): 21-30. Padang.




DOI: http://dx.doi.org/10.24111/jrihh.v7i2.1225

Refbacks

  • There are currently no refbacks.




JRIHH INDEXED BY :

       
       


Published by BARISTAND INDUSTRI BANJARBARU (E-ISSN: 2503-0779 dan P-ISSN : 2086-1400).

 Creative Commons License