Characteristics of Vanadium Doped And Bamboo Activated Carbon Coated LiFePO4 And Its Performance For Lithium Ion Battery Cathode

Nofrijon Sofyan, Subkhan Alfaruq, Anne Zulfia, Achmad Subhan


Vanadium doped and bamboo activated carbon coated lithium iron phosphate (LiFePO4) used for lithium ion battery cathode has been successfully prepared. Lithium iron phosphate was prepared through a wet chemical method followed by a hydrothermal process from the starting materials of LiOH, NH4H2PO4, and FeSO4.7H2O. The dopant variations of 0 wt.%, 3 wt.%, 5 wt.%, and 7 wt.% of vanadium and a fixed 3 wt.% of bamboo activated carbon were carried out via a solid-state reaction process each by using NH4VO3 as a source of vanadium and carbon pyrolyzed from bamboo tree, respectively. The characterization was carried out using X-ray Diffraction (XRD) for the phase formed and its crystal structure, Scanning Electron Microscope (SEM) for the surface morphology, Electrochemical Impedance Spectroscopy (EIS) for the conductivity, and battery analyzer for the performance of lithium ion battery cathode. The XRD results show that the phase formed has an olivine based structure with an orthorhombic space group. Morphology examination revealed that the particle agglomeration decreased with the increasing level of vanadium concentrations. Conductivity test showed that the impedance of solid electrolyte interface decreased with the increase of vanadium concentration indicated by increasing conductivity of 1.25 x 10-5 S/cm, 2.02 x 10-5 S/cm, 4.37 x 10-5 S/cm, and 5.69 x 10-5 S/cm, each for 0 wt.%, 3 wt.%, 5 wt.%, and 7 wt.% vanadium, respectively. Vanadium doping and bamboo activated carbon coating are promising candidate for improving lithium ion battery cathode as the initial charge and discharge capacity at 0.5C for LiFePO4/C at 7 wt.% vanadium is in the range of 8.0 mAh/g.


Activated carbon, bamboo, LiFePO4, lithium ion battery, nanocomposite

Full Text:



Jayabhaye, R. Afre, T. Soga, and M. Sharon. 2007. “Carbon Material from Natural Sources as an Anode in Lithium Secondary Battery.” Carbon Letters 8 (4): 285–91.

Böckenfeld, N., T. Placke, M. Winter, S. Passerini, and A. Balducci. 2012. “The Influence of Activated Carbon on The Performance of Lithium Iron Phosphate Based Electrodes.” Electrochimica Acta 76: 130–36. doi:10.1016/j.electacta.2012.04.152.

Bystriakova, N., V. Kapos, I. Lysenko, and C. M. A. Stapleton. 2013. “Distribution and Conservation Status of Forest Bamboo Biodiversity in The Asia-Pacific Region.” Biodiversity and Conservation 12: 1833–41.

Chen, M., L.-L. Shao, H.-B. Yang, T.-Z. Ren, G. Du, and Z.-Y. Yuan. 2015. “Vanadium-Doping of LiFePO4/Carbon Composite Cathode Materials Synthesized with Organo Phosphorus Source.” Electrochimica Acta 167: 278–86. doi:10.1016/j.electacta.2015. 03.185.

Chiang, C., H.-C. Su, P.-J. Wu, H.-J. Liu, C.-W. Hu, N. Sharma, V. K. Peterson, H-W. Hsieh, Y-F. Lin, W. C. Chou, C-H. Lee, J-F. Lee, and B-Y. Shew. 2012. “Vanadium Substitution of LiFePO4 Cathode Materials to Enhance the Capacity of LiFePO4-Based Lithium Ion Batteries.” The Journal of Physical Chemistry C 116: 24424–29. doi:10.1021/jp307047w.

Chung, S. Y., J.T. Bloking, and Y. M Chiang. 2002. “Electronically Conductive Phospho-Olivines as Lithium Storage Electrodes.” Nature Materials 1: 123–28. doi:10.1038/nmat732.

Cullity, B. D. 1978. Elements of X-Ray Diffraction. 2nded. Massachusetts: Addison-Wesley.

Gu, X., Y. Wang, C. Lai, J. Qiu, S. Li, Y. Hou, W. Martens, N. Mahmood, and S. Zhang. 2015. “Microporous Bamboo Biochar for Lithium−Sulfur Batteries.” Nano Research 8 (1): 129–39. doi:10.1007/s12274-014-0601-1.

Lei, X., H. Zhang, Y. Chen, W. Wang, Y. Ye, C. Zheng, P. Deng, and Z. Shi. 2015. “A Three-Dimensional LiFePO4/Carbon Nano-Tubes/Graphene Composite as a Cathode Material for Lithium-Ion Batteries with Superior High-Rate Performance.” Journal of Alloys and Compounds 626: 280–86. doi:10.1016/j.jallcom.2014.09.169.

Li, L., L. Wu, F. Wu, S. Song, X. Zhang, C. Fu, D. Yuan, and Y. Xiang. 2017. “Review—Recent Research Progress in Surface Modification of LiFePO4 Cathode Materials.” Journal of The Electro-Chemical Society 164 (9): A2138–50. doi:10.1149/2.1571709jes.

Long, Y.-F., J. Su, X.-R. Cui, X.-Y. Lv, and Y.-X. Wen. 2015. “Enhanced Rate Performance of LiFePO4/C by Co-Doping Titanium and Vanadium.” Solid State Science 48: 104–11.doi:10.1016/j.solidstatesciences.2015.07.011.

Mathew, V., S. Kim, J. Kang, J. Gim, J. Song, J. P. Baboo, W. Park, D. Ahn, J. Han, L. Gu, Y. Wang, Y.-S. Hu, Y.-K. Sun, and J. Kim. 2014. “Amorphous Iron Phosphate : Potential Host for Various Charge Carrier Ions.” NPG Asia Materials 6: e138. doi:10.1038/am.2014.98.

Pietrzak, T. K., M. Wasiucionek, I. Gorzkowska, J. L. Nowiński, and J. E. Garbarczyk. 2013. “Novel Vanadium-Doped Olivine-Like Nanomaterials with High Electronic Conductivity.” Solid State Ionics 251: 40–46. doi:10.1016/j.ssi.2013.02.012.

Qin, G., Q. Ma, and C. Wang. 2014. “A Porous C/LiFePO4/Multiwalled Carbon Nano-Tubes Cathode Material for Lithium Ion Batteries.” Electrochimica Acta 115: 407–15. doi:10.1016/j.electacta.2013.10.177.

Sofyan, N., A. D. Rachmawati, A. Zulfia, and A. Subhan. 2018. “Pyrolysis of Activated Carbon from Coconut Shell and Its Characteristic in The LiFePO4/V/C Composite for Lithium Ion Battery Cathode.” In IOP Conference Series: Earth and Environmental Science. Vol. 105. doi:10.1088/1755-1315/105/1/012017.

Sofyan, N., P. Sekaringtyas, A. Zulfia, and A. Subhan. 2018. “Use of Carbon Pyrolyzed from Rice Husk in LiFePO4/V/C Composite and Its Performance for Lithium Ion Battery Cathode.” In IOP Conference Series: Earth and Environmental Science. Vol. 105. doi:10.1088/1755-1315/105/1/012023.

Su, W., K. Xu, G. Zhong, Z. Wei, C. Wang, and Y. Meng. 2017. “Enhanced Electrochemical Performance of LiFePO4 as Cathode for Lithium Ion Battery by Codoping with Titanium and Nitrogen.” International Journal of Electrochemical Science 12: 6930–39. doi:10.20964/2017.08.13.

Tsubota, T., K. Ishimoto, S. Kumagai, S. Kamimura, and T. Ohno. 2018. “Cascade Use of Bamboo as Raw Material for Several High Value Products: Production of Xylo-Oligosaccharide and Activated Carbon for EDLC Electrode from Bamboo.” Journal of Porous Materials 25: 1–9. doi:10.1007/s10934-018-0567-6.

Zhang, Y. D., Y. Li, X. H. Xia, X. L. Wang, C. D. Gu, and J. P. Tu. 2015. “High-Energy Cathode Materials for Li-Ion Batteries: A Review of Recent Developments.” Science China Technology Sciences 58 (11): 1809–28. doi:10.1007/s11431-015-5933-x.

Zhang, Y., Q.-Y. Huoc, P.-P. Du, L.-Z. Wang, A.-Q. Zhang, Y.-H. Song, Y. Lv, and G.-Y. Li. 2012. “Advances in New Cathode Material LiFePO4 for Lithium-Ion Batteries.” Synthetic Metals 162 (13): 1315–26. doi:10.1016/j.synthmet.2012.04.025.



  • There are currently no refbacks.

Copyright (c) 2018 Nofrijon Sofyan

Jurnal Kimia dan Kemasan is indexed by:

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.