OPTIMASI RESPON TUNGGAL PADA PROSES TEXTURING BENANG DTY-150D/96F MENGGUNAKAN METODE TAGUCHI

Aris Budiyanto, Sukarman Sukarman, Stefanus Bambang Jumawan, Amri Abdulah, Jatira Jatira

Abstract


 

Artikel ini membahas tentang optimasi parameter proses produksi benang DTY 150D/96F menggunakan mesin texturing merek Oerlikon Barmag. Pada proses pembuatan benang, tenacity merupakan salah satu variabel respon yang harus dikontrol agar konsisten memenuhi spesifikasi 3,8-4,4 g/den. Terdapat beberapa variabel input yang mempengaruhi tenacity dan dua diantaranya adalah draw ratio dan suhu. Eksperimen dilakukan dengan menggunakan orthogonal array L16 Taguchi  menggunakan parameter suhu dan draw ratio . Parameter draw ratio  yang digunakan adalah 1:1,23; 1:1,30; 1:1,40; dan 1:1,55. Sedangkan parameter suhu yang digunakan adalah 150, 160, 170, dan 180oC. Penelitian ini bertujuan untuk mendapatkan nilai tenacity optimum dari kombinasi parameter proses yang ditetapkan. Metode optimasi ini telah berhasil melakukan perbaikan nilai tenacity dan memenuhi spesifikasi secara konsisten. Nilai tenacity rata-rata DTY 150D/96F tertinggi mencapai 4,25 g/den  yang dicapai pada draw ratio dan suhu berturut-turut 1:1,55 dan 150oC. Untuk kedua parameter yang diberikan, draw ratio  merupakan parameter yang memberikan dampak tertinggi terhadap tenacity dengan nilai delta sebesar 0,72. Hasil ini diharapkan bisa digunakan untuk mengembangkan kualitas benang DTY 150D/96F pada aspek-aspek signifikan lainya.


Keywords


Tenacity, DTY 150D/96F, Taguchi Method, S/N ratio, and Draw ratio

Full Text:

PDF

References


N, G. A Review of Some Significant Research Trends in Yarn Texturising. Res. Dev. Mater. Sci. 4, 369–372 (2018).

Wellknown. Draw Textured Yarn. Wellknown.co.in https://www.wellknown.co.in/dty-new/.

Anthony, R. B. Handbook of Properties of Textile and Technical Fibres. Woodhead (2018).

Fashola, K. O. & Onemano, G. O. Studies on the Properties of Some Selected Polyester Textured Yarns. Man-Made Text. India 40, 272–275 (2012).

Gupta, A., V. B. & Kothari, V. K. Manufactured Fibre Technology. Manufactured Fibre Technology (1997). doi:10.1007/978-94-011-5854-1.

Yildirim, K., Altun, S. & Ulcay, Y. Relationship between yarn properties and process parameters in false-twist textured yarn. J. Eng. Fiber. Fabr. 4, 26–32 (2009).

Elmogahzy, Y. & Farag, R. Tensile properties of cotton fibers. Handbook of Properties of Textile and Technical Fibres (Elsevier Ltd, 2018). doi:10.1016/B978-0-08-101272-7.00007-9.

Van Nostrand, R. C. Design of Experiments Using the Taguchi Approach: 16 Steps to Product and Process Improvement. Technometrics vol. 44 (2002).

Daniyan, I. A., Mpofu, K. & Adeodu, A. O. Optimization of welding parameters using Taguchi and response surface methodology for rail car bracket assembly. (2018).

Pérez Pozo, L., Fernando Olivares, Z. & Orlando Durán, A. Optimization of welding parameters using a genetic algorithm: A robotic arm-assisted implementation for recovery of Pelton turbine blades. Adv. Mech. Eng. 7, 1–17 (2015).

Gunawan, E., Sukarman, S., Shieddieque, A. D. & Anwar, C. Optimasi Parameter Proses Resistance Spot Welding pada Pengabungan Material SECC-AF. (2019).

Sahithi, V. V.D., Malayadri, T. & Srilatha, N. Optimization of turning parameters on surface roughness based on Taguchi technique. Mater. Today Proc. 18, 3657–3666 (2019).

Sukarman, S., Sitorus, I. R., Aribowo, B., Rajab, D. A. & Heryadi, Y. Optimasi Parameter Proses Powder Coating pada Plat Electro Galvanized. in Prosiding SEMNASTERA (Seminar Nasional Teknologi dan Riset Terapan) 110–115 (2019).

Kaynak, H. K. & Babaarslan, O. Breaking Strength and Elongation Properties of Polyester Woven Fabrics on the Basis of Filament Fineness. J. Eng. Fiber. Fabr. 10, 155892501501000 (2015).

Erbil, Y., Babaarslan, O. & Ilhan, İ. A comparative prediction for tensile properties of ternary blended open-end rotor yarns using regression and neural network models. J. Text. Inst. 109, 560–568 (2018).

Wickramasinghe, G. L. D. & Foster, P. W. Investigation of the influence of effect-yarn draw and effect-yarn overfeed on texturing performance: comparison between air-jet and steam-jet textured yarn. Fash. Text. 1, 1–16 (2014).

Asghar, A., Ahmad, M. R. & Yahya, M. F. Effects of metal filament’s alignment on tensile and electrical properties of conductive hybrid cover yarns. Fash. Text. 3, (2016).

Semnani, D., Hassani, F., Hadjianfar, M. & Rezazadeh Tehrani, P. Optimizing the impact resistance of high tenacity Nylon 66 weft knitted fabrics via genetic algorithm. Fash. Text. 3, (2016).

Amjad, A. I. & Kumar, R. Effect of Fibre Fineness and Noil Extraction on the Different Shade Depths of Melange Yarns. J. Inst. Eng. Ser. E 101, 33–43 (2020).

Malik, S. A., Farooq, A., Gereke, T. & Cherif, C. Prediction of blended yarn evenness and tensile properties by using artificial neural network and multiple linear regression. Autex Res. J. 16, 43–50 (2016).

Sekerden, F. Investigation on the unevenness, tenacity and elongation properties of bamboo/cotton blended yarns. Fibres Text. East. Eur. 86, 26–29 (2011).

Bhatti, M. R. A., Tausif, M., Mir, M. A., Umar, M. & Cassidy, T. Effect of key process variables on mechanical properties of blended vortex spun yarns. J. Text. Inst. 110, 932–940 (2019).

Nabi, K. A., Nafis, A. & Ramij, H. Comparison of Several Cotton Yarn Properties before and after Conditioning. Int. J. Text. Sci. 6, 88–91 (2017).

ASTM D 2256. Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method 1. vol. 07 1–15 (2002).

Mintab. Select the options for Analyze Taguchi Design (Static). https://support.minitab.com/en-us/minitab/19/help-and-how-to/statistical-modeling/doe/how-to/Taguchi /analyze-Taguchi -design/perform-the-analysis/select-the-options-static-design/?SID=63406.

Arnold, S. F. Design of Experiments with MINITAB. The American Statistician vol. 60 (2006).

CASTILLO, E. DEL. Process Optimization A Statistical Approach. (Springer New York, 2007).

Fibre, D. Tenacity. Dominion Fibre https://dominionfiber.com/calculator-tool/ (2020).

R. Bunsell, A. Handbook of tensile properties of textile and technical fibres. (Woodhead Publishing Limited, 2009).

Atkinson, C. False Twist Textured Yarns: Principles, Process. and Appl. False Twist Textured Yarns: Principles, Processing and Applications (2012). doi:10.1533/9780857095596.

Ross, P. J. Taguchi Techniques for Quality Engineering. (Tata McGraw-Hill, 2005).




DOI: http://dx.doi.org/10.31266/at.v35i2.6094

Refbacks

  • There are currently no refbacks.


Arena Tekstil indexed by:

Science and Technology Index  Dimensions

 Garba Rujukan Digital (GARUDA)


Copyright Arena Tekstil (E-ISSN: 2548-7264, P-ISSN: 0518-4010)

Published by: BALAI BESAR TEKSTIL, Jl. Jenderal Ahmad Yani No. 390, Bandung.

Creative Commons License