Preliminary Studies with Filler Organoclay Nanocomposite Making for Packaging

Yoyon Suyono

Abstract


Clay from West Kalimantan is still used as a raw material in the ceramic industry and it doesn’t have spesific processes for the manufacture of other products. The objective of this study is to determine the effect of organoclay filler on the physical properties of tensile strength clay nanocomposite food packaging applications. The step for clay nanocomposite were produced by purification, milling, organoclay, clay nanocomposite. Clay nanocomposite were characterized by analysis cation exchange capacities (CEC), X-ray diffraction (XRD), particle size analysis (PSA), scanning electron microscopy (SEM), tensile strength test and elongation at break. The purified with hydrochloric acid can increase the value of CEC and remove of the impurities. High energy milling (HEM) technique are with a time of 2 hours gained 225.3 nm sized nanoparticles as raw material organoclay. The addition of 1% organoclay filler increases the tensile strength of nanocomposite clay, according grade 2 and is suitable for second packaging or  not directly contact to food.

Keywords


clay; nanocomposite; organoclay; packaging

Full Text:

PDF

References


Cabedo, L., E. Giménez, J.M. Lagaron, R. Gavara, dan J. Saura. 2004. Development of EVEOH-Kaolinite Nanocomposites. Polymer 45(15): 5233-5238.

Chitraningrum, N. 2008. Sifat Mekanik dan Termal pada Bahan Nanokomposit Epoxy-clay Tapanuli. Skripsi. Departemen Fisika. FMIPA. UI. Depok.

Downs, R.T., dan M. Hall-Wallace. 2003. The American Mineralogist Crystal Structure Database, American Mineralogist 88:247-250.

Hadiyarwarman, A. Rijal, B.W. Nuryadin, M. Abdullah, dan Khairurrijal, 2008. Fabrikasi Material Nanokomposit Superkuat, Ringan dan Transparan Menggunakan Metode Simple Mixing. Jurnal Nanosains & Nanoteknologi 1 (1):14-21.

Patel, H.A., R.S. Somani, H. C. Bajaj, dan R.V. Jasra. 2006. Nanoclay for Polymer Nanocomposites, Paints, Ink, Greases and Cosmetic Formulations, Drug Delivery Vechicle and Waste Wáter Treatment. Bull. Mater. Sci. 29(2):133-145.

Ray, S., Allan E., S. Y. Quek, A. Easteal, dan X.D. Chen. 2006. The Potensial Use of Polymer-Clay Nanocomposites in Food Packaging. Int. J. of Food Eng. 2(4) article 5. 1-11.

Syuhada, R. W., Jayatin, dan S. Rohman. 2009. Modifikasi Bentonit (Clay) Menjadi Organoclay dengan Penambahan Surfaktan. Jurnal Nanosains & Nanoteknologi. 2(1):48-51.

Sunardi, Y. Arryanto, dan Sutarno. 2009. Adsorpsi Asam Giberelin pada Kaolin Alam Asal Tatakan Kalimantan Selatan. Indo. J. Chem. 9(3): 373-379.

Wahyuni, E.T. 1993. Penggunaan Metode Difraksi Sinar-X Deteksi Perubahan Kristal Mineral Lempung Akibat Pemanasan dan Aktivasi. Berkala Ilmiah FMIPA-UGM. 4(3).

Yusnafi, 2011, Karakterisasi Nanostruktur Karbon dari Grafit Hasil Miling. Dalam Prosiding Seminar Nasional Kimia Terapan Indonesia. Serpong.




DOI: http://dx.doi.org/10.36974/jbi.v3i2.740

Refbacks

  • There are currently no refbacks.


BIOPROPAL Industri

Published by :

Institute for Industrial Research and Standardization (Baristand Industri) in Pontianak

Agency for Industrial Research and Development, Ministry of Industry 

Jl. Budi Utomo No. 41 Pontianak, West Kalimantan, Indonesia

Tel / Fax : +62 561 881393, 881533

email      : biopropal.industri@gmail.com

 

BIOPROPAL Industri indexed in: 

Hasil gambar untuk gambar doajHasil gambar untuk gambar google scholar

RJI Main logo